wallputty cr
wallputty cr


Coarse Finishing Material For Walls And Ceilings

BESTBUILD Wall Putty CR is a coarse cement based finishing material that makes uneven plastered surfaces even and provides weather resistant matt finish. It also acts as a base coat for BESTBUILD WALL PUTTY FN and for application of paints.

  • Excellent Workability
  • Superior Bonding
  • Water Resistant
  • Anti Fungal

Available in 40 kg pack.

  • Ideal for ceilings and walls with uneven plastered surfaces and pinholes in both internal and external areas.
  • Can be applied on concrete rendered walls, hollow blocks, ceilings, precast walls, etc.
Surface Preparation
  • 1. Clean the surface to be free from all dirt, oil, grease, loose particles, etc.
  • 2. If it’s an old painted wall or lime washed wall, scratch the old surface with wire brush.
  • 3. Moisten the surface with clean water.
Application Method
  • 1. Add clean water as per the recommended mixing ratio and mix until a homogeneous lump-free paste of desired consistence is obtained.
  • 2. After mixing, allow the paste to stand for 5 minutes for it to mature.
  • 3. Apply the first coat on the substrate in bottom-to-top direction with a trowel/blade. The thickness of a coat should be between 2mm to 5mm.
  • 4. Apply the second coat when the first coat is completely dry. The second coat can also be done with BESTBUILD WALL PUTTY FN if a smooth finish is required.
  • 5. Remix the paste if its left undisturbed for 30 minutes or more.
  • 6. Allow 3 days for the wall putty to get completely dry and set before applying paint.
Pot Life 2 to 3 hours
Mixing Ratio 28-32% water by weight
Coverage • Approximately 4 to 5 sqft/kg at 3 mm thickness. The coverage depends upon the quality and evenness of the substrate.
• The minimum and maximum thickness of a coat should be 2mm and 5mm.
Shelf Life & Storage Shelf life is 6 months from the date of manufacturing, if stored in unopened, cool & dry place. Keep away from direct sunlight.